44″ Triple-Rail Column

Posted on by ValueRail

$306.12

SKU: VRCPT-P Category:

Description

44″ Triple-Rail Column

Triple-Rail posts are pre-drilled on all four sides allowing you to create turns and intersections in your guardrail. These posts serve as a spoke that can run guardrail in any direction.

  • Columns:  3-1/2” x 3-1/2” x 3/16″ structural tube; 18”H Single Rail; 44”H Double Rail; 44”H Triple Rail
  • Base Plates:  7” x 7” x 3/8″ plate steel
  • Anchors:  3/8” x 4” Wedge Bolts (included)
  • Post Cap:  Black molded plastic cap
  • Rails:  Corrugated 14 gauge steel guard rails, 12”H with hemmed / rolled edges
  • Lengths: 2 ft. – 10 ft. in one foot increments
  • Rail Hardware Pack: (4) 1/2” x 5” thru bolts, nuts, and flat washers
  • Column Hardware Pack: (4) 3/8” x 4” wedge bolts, yellow plastic plugs for unused holes, and black molded plastic cap
  • Lift-Out Guard Rail:  4 ft., 6 ft., 8ft., and 10 ft.  (Measured center-of-column to center-of-column)
  • Common Column Post used for Lift-Out or Bolted Rail systems. (Lift-Out Triple Rail not available)

Additional information

Weight 36 lbs
Dimensions 44 in

Leave a Reply

Your email address will not be published.

*

*